top of page
ChatGPT Image May 22, 2026, 12_22_22 PM.png

Fire Doors Supplied, Installed and Inspected Across London

NAFDI approved fire door specialists. Certified FD30 and FD60 fire doors for flats, HMOs, care homes, schools and commercial buildings, fitted by our own engineers and handed over with a certificate and photo report for your fire risk assessment.

ChatGPT Image May 22, 2026, 12_07_54 PM.png

Fire Door Supply and Installation

We supply and install third party certified FD30, FD30s and FD60 fire doorsets for flat entrances, communal areas, kitchens, plant rooms and escape routes. Frames, intumescent seals, closers, hinges and signage are fitted as one tested system, exactly as the manufacturer specifies.

​

Every installation is carried out by our own engineers and handed over with an installation certificate, the doorset's product certification and a photo report, ready for your fire risk assessor, local authority or insurer.

WhatsApp Image 2026-05-22 at 12.21_edited.jpg

Inspections, Repairs and Maintenance

Damaged seals, misaligned closers, oversized gaps and the wrong hardware can stop a fire door from working when it matters. Our door by door inspections follow BS 8214 and check every point, giving you a written report with photos and a clear list of actions.

​

​We then carry out the remedial repairs ourselves, from replacing seals and closers to adjusting gaps and fitting compliant signage, and offer scheduled maintenance contracts so your fire door log is always up to date for inspections.

ChatGPT Image May 22, 2026, 12_22_22 PM.png

Fire Door Checks Are Now a Legal Duty

Article 17 of the Regulatory Reform (Fire Safety) Order 2005 requires fire doors to be kept in efficient working order and good repair. Under the Fire Safety (England) Regulations 2022, the responsible person for a residential building over 11 metres must check all communal fire doors every three months and use best endeavours to check every flat entrance door once a year. In every block of flats, residents must also be told why fire doors matter.

​

We carry out and record these checks for landlords, HMOs, managing agents, care homes, schools and commercial buildings across London and the home counties. With over 20 years in fire safety and NAFDI, BAFE and NICEIC accreditation, we keep your building compliant and ready for inspection.

Frequently Asked Questions

Q / What is the difference between FD30 and FD60?

The number is the minutes the door is tested to resist fire: 30 or 60. An "s" (FD30s) means it also has smoke seals. Your fire risk assessment or building plans set which rating each door needs.

Q / How often should fire doors be inspected?

In residential buildings over 11 metres, communal doors every three months and flat entrance doors every year. Other premises should follow their fire risk assessment; six monthly checks are common for busy commercial buildings.

Q / Can my existing doors be repaired instead of replaced?

Often, yes. Gaps, seals, closers and hardware can usually be put right. If a door has no certification or is badly damaged, we will tell you honestly that it needs replacing.

Q / What paperwork do I get?

An installation certificate for each door, the doorset's product certification and a photo report. For inspections, a door by door report with defects and recommended actions.

Q / How long does an installation take?

A single flat entrance door is normally fitted in one day. Larger projects are scheduled floor by floor so residents keep secure access throughout.

Fill in the form below to let us know which service you're interested in and how we can help. We'll get back to you as soon as possible.

Which service do you need?
bottom of page